Series 8000 HPLC System
LAB's HPLC is built to provide an exceptional cost/performance ratio. Continued research and development provide high-end performance and features, while a state of the art manufacturing facility ensures outstanding quality. With more than 60 years experience and development, we are proud to present our new HPLC, Series 8000.
LB8700 Isocratic HPLC System
Configuration:
LB8112 Isocratic Pump
Selection of:
LB8131 Column Compartment
LB8120 UV/Vis Detector
LB8160 PDA Detector
LB8170 RI Detector
LB8180 fluorescence detector
Chromachem ELS Detector
LB8150 Plus Autosampler
Software
LB8800 High-pressure Binary HPLC system
Configuration:
LB8111 Binary Pump
Dynamic Mixer Assembly
LB8101 Vacuum Degasser
LB8131 Column Compartment
L
Selection of:
B8120 UV/Vis Detector
LB8160 PDA Detector
LB8170 RI Detector
LB8180 fluorescence detector
Chromachem ELS Detector
LB8150 Plus Autosampler
Software
LB8900 Low-pressure Quaternary HPLC System
Configuration:
LB8110 Quaternary Pump
Dynamic Mixer Assembly
LB8101 Vacuum Degasser
LB8131 Column Compartment
Selection of:
LB8120 UV/Vis Detector
LB8160 PDA Detector
LB8170 RI Detector
LB8180 fluorescence detector
Chromachem ELS Detector
LB8150 Plus Autosampler
Software
Vacuum Degasser
LB8101 Vacuum Degasser
Number of channel : 4 Channels Maximum flow rate : 10mL/min per channel
Column Compartment
LB8131 Column Compartment
Real-time temperature tracking and monitoring The temperature consistency is good.The temperature of the exit of the column is the same as that of the center of the column
LC Autosampler
LB8150 Plus LC Autosampler
Newly launched LB8150 Plus LC Autosampler developed by our own technology can provide the enhanced efficiency of analysis with fast injection and enlarged sample capacity. The spray-type rinsing reduces the carry-over by washing off the contamination and the direct injection leads the low sample consumption. The leak sensor and the automatic tray sensor ensure the process safety as well as the LED inside of equipment allows users to see its operation. Sample Capacity : Up to 120 samples (2ml vial)
Pumps
LB8110/LB8111/LB8112 Pumps
A powerful LCD control pad added to Pumps provides easy-to-get ready status with a finger tab and monitors a pump without a software. LB8110 Plus Quaternary Pump enables delivery of the superior repeatability with the more stabilized baseline when it’s in the gradient condition.
Smart Control
Setting any factors or pressing ‘Purge’ button, you can easily set the flow rate or solvent composition. Also, you can monitor the pressure and status of pumps.
Fully Automatic
Prime
You only need to set the solvent composition and press ‘Prime On’. It will automatically flow each solvent at 100% to remove bubbles or change the solvent in the flow path and then get back to the set composition rate to be ready
LB8110 Quaternary Pump: Parallel dual-plunger pump,
Low-pressure gradient.
Number of Solvents: up to 4 solvents
Gradient formation : 4-channel mixing valve.
LB8111 Binary Pump:
Double Parallel dual-plunger pump, High-pressure gradient
Number of Solvents : 2
LB8112 Isocratic Pump: No mixing valve. Operating principle : Parallel dual-plunger pump.
Easily upgraded to LB8110 Plus Quaternary pump.
Detectors
LB8120 LB8160 LB8170 LB8180 Detectors
LB8120 UV/Vis Detector
Wavelength Range: 190-900nm
Dual Wavelength Detection
LB8160 PDA Detector
Wavelength : 190~950nm
No. of PDA Diode: 1024
LB8170 RI Detector
Insulated Optical path system and self-flushing reference
Pool
RI Range : 1.00 ~ 1.75 RIU
LB8180 Fluorescence Detector
High efficiency concave holographic diffraction grating
Automatic, real-time peak scan
Chromachem ELS Detector
Low temperature evaporation
Venturi tube technology to ensure the invariance of analytical samples
GC8000 Gas Chromatography
LAB’s 5th-generation GC is starting to be a new powerful leader in a GC market. With strongly enhanced APCs, installation of three units of inlet and detector for each enables to extend the various GC configurations to perform complex analyses.
8000GC provides substantially reliable and precise data by every single part from the stable inlets to the extremely sensitive detectors as well as the innovative haptic touch pad strengthening user interface with a finger-tip.
Moreover, an intuitive chromatography data system with user-friendly interface improves the ease of instrument control and a network communication speeds up a data process.
Features of GC8000 Gas Chromatography
View
- Enlarged haptic color LCD showing all factors at a glance
- Classic and lab-suitable design
- Intuitive and user-friendly view by LAB chromatography data system
Verification
- High speed data process by network communication
- Enhanced APCs for all modules
- Upgraded column oven
- Programming ramp/plateaus : 25/26
Value
- Saving user's valuable time with a high throughput autosampler
- Improved column conditioning function
- Sensitive leak detection (H2)
- Prevention of oven malfunction (Over heating)
- Automatic stop when an oven door gets opened during operation
Variety
- Maximum no. of inlet / detector installation : 3
- Various inlets available : Capillary(Split/Splitless) / Packed / On-column inlet
- Various detectors :
1) Flame ionization detector (FID
2) Thermal conductivity detector (TCD)
3) Nitrogen phosphorus detector (NPD)
4) Flame photometric detector (FPD)
5) Electron capture detector (ECD)
Series 2000 HPLC System
LAB's HPLC is built to provide an exceptional cost/performance ratio. Continued research and development provide high-end performance and features, while a state of the art manufacturing facility ensures outstanding quality. With more than 60 years experience and development, we are proud to present our legacy HPLC, Series 2000.
LB2000 Isocratic HPLC System
Configuration:
Series Isocratic Pump
Column Compartment
Selection of:
UV/Vis Detector
PDA Detector
RI Detector
Fluorescence Detector
Chromachem ELS Detector
As Autosampler
Software
LB2000 High-pressure Binary HPLC system
Configuration:
Binary Pump
Dynamic Mixer Assembly
Vacuum Degasser
Column Compartment
Selection of:
UV/Vis Detector
PDA Detector
RI Detector
Fluorescence Detector
Chromachem ELS Detector
As Autosampler
Software
LB2400 High-pressure Quaternary HPLC System
Configuration:
Quaternary Pump
Dynamic Mixer Assembly
Vacuum Degasser
Column Compartment
Selection of:
UV/Vis Detector
PDA Detector
RI Detector
Fluorescence detector
Chromachem ELS Detector
As Autosampler
Software
PCR3 Post Column Reactor
The third generation post column reactor of United States original imports overcomes many deficiencies in pressure,flow & temperature control such aspect of the second generation.
Super high precision,excellent performance & incomparable multifunction design lead in the post column reactor detection field.
PCR3+ Post Column Reactor
PCR3+ is based on PCR3 customer application and integrates the technological and intelligent innovation of LABA for more than 60 years.Its unsurpassed performance is bound to be the first choice for scientific and rigorous researchers and quality control and testing personnel.As a bright star of Post Column Reactor detection, it can solve all your derivatization problems and application expansion problems.
Features of PCR3+ Post Column Reactor
Super-high Precision
- Derivatization Reagent Flow Precision promoting 10 times;
- Derivatization Reactor Temp. Precision promoting 5 times;
- Excellent performance, Multiple functions;
- Self-protection: overpressure, Liquid leakage automatic stop pump, temperature overheat protection function.
Compatible All HPLC Systems
- All pump parameter achieving front panel & computer dual control;
- High precision injection pump making systems appearing outstanding sensitivity and consistency;
- Pump high precision component used by chemical inert material, strong and durable;
- Online self-flush design, prolonging the service life of the sealing ring;
- Chemical inert flow path, prolonging the service life of the system and reducing maintenance costs;
- Continuous reaction ring, completely sealed, multi-direction flow achieving mixing effectively;
- Multiple reactor option, reactor volume being customized;
- Reactor replacement more conveniently, making the application changes more easily;
- Super high precision reaction temperature control design & super-fast constant temperature performance, greatly saving user time, ensuring reproducibility of test results;
- Intuitive and visual touch screen interactive control system, clear at a glance;
- Integrated reagent storage disk, corrosion resistant chassis;
- Constant pressure inert gas protection system.
Application
Carbamates
Glyphosates
Aflatoxins
Amino
Acids
Taurine
Shellfish toxin
Tetrodotoxin
Fumonisin
Biogenic amine
Alprostadil
Voglibose
Bromate
Formaldehyde
Hexavalent chromium
SMT Column
LAB offers a wide range of analytical and preparative chromatography columns to meet the needs of virtually every application. LAB Column Advisor recommends the most appropriate column depending on the on the application requirements you need to consider and the column characteristics you are looking for.
Separations developed on our analytical columns can be directly scaled up to preparative columns. We supply a wide range of phase chemistries in numerous column dimensions for preparative work to meet your scale-up needs. All chromatography columns meet stringent specifications to ensure excellent performance and column-to-column reproducibility.
Common columns are SMT 4.6*250mm,SMT 4.6*150mm In the full PH range.